Your cart is empty.
CDRF Basic Bug and Radio Frequency Detector (50MHz to 6.0GHz)
Radio frequency detectors are designed to detect wireless signals being transmitted within a certain frequency range. This unit detects 50MHz to 6.0GHz, while most surveillance equipment operates at 2.4GHz.
Check homes and offices for wireless devices with this device. Wireless transmitters vary in signal strength. Some are designed to transmit as far as three miles away while others can only be received from a room away. Micro spy cams are designed to output at low signal strengths to make them more difficult to detect. In this case, the detector will need to be extra sensitive, and the user may need to be nearly on top of the device. However, if the detector is too sensitive it will give false alarms and waste the time of the user.
Built-in sensitivity adjustment separates this bug detector from some of the others you see. It has a built-in sensitivity adjustment allowing you to be able to detect both strong and weak signal strengths. Sweep the suspect area and gradually increase the sensitivity until you eventually home in on the target.
This particular model features analog/digital detection switching, expanding your scanning abilities beyond just radio frequencies to allow Bluetooth, WiFi, and cell phones signal detection.
Covert and easy to use, this device starts scanning instantly when you turn it on. Operate in complete secrecy by using its silent vibrating mode or by using the included earphones while making your sweep.
Its rechargeable battery lasts up to four hours. Use this device to secure your home, office, casino, hotel room or any other place in which you demand a bug-free environment. Locate cameras and audio bugs hiding in air fresheners, floodlights, ceilings, behind mirrors, hair dryers, ventilation and air control vents, cigarette cases, or bags. Use it to find Wi-Fi hot spots. Use it to identify live cell phones that may be transmitting private conversations. Make invisible signals visible!
- Detects frequencies from 0MHz - 6.0GHz
- Monitor (1MHz - 470MHz)
- Mobile phone monitor (500MHz - 2500MHz)
- Telephone monitor (50MHz - 460MHz)
- Digital monitor (900MHz - 1900MHz)
- Car monitor (500MHz - 1900MHz)
- Car tracker (900MHz - 1900MHz)
- Pinhole camera (700MHz - 5800MHz)
- Encrypted camera (2400MHz - 5800MHz)
- Alert mode 1: 4 indicator lights and "DiDi" voice
- Alert mode 2: Vibration and indicator lights
- Alert mode 3: Silent, indicator lights and earphone
- No-voice vibration induction. As long as (130MHz-1900MHz)
- Wiring radiated source induction lets it detect secretly in any special (4000MHz - 6000MHz) location.
- 1 Silver RF detection device
- 1 Set of earbuds
- 1 Instruction Booklet
- Frequency: 0 - 6 GHz
- Lower Frequency: 0 ~ 120 MHz
- Higher Frequency: 149 MHz ~ 400 MHz
- GSM: 900 MHz ~ 1900 MHz
- Detectable Image Frequency: 200 MHz ~ 2400 MHz
- Microwave Frequency: 2400 MHz ~ 6 GHz
- Working Voltage: 3V (AAA x 2)
- Working Current: Caution 8mA
- Vibration: 70mA
- Sensitivity: Max. 10 meters (depends on transmitter output)
- Color: silver
- Dimensions: 56 x 90 x 17 mm
- Weight: 50g Gross
- Weight 100g
- Power Consumption: 2 AAA batteries, up to 4 hours of continuous use
Subject to MGI warranty terms. For specific details on warranty please contact our sales team at (850) 864-3325.
Calculated at Checkout