IP 66 RATED INDOOR/OUTDOOR SECURITY CAMERA HOUSING WITH HEATER AND BLOWER
MOUNTING BRACKET NOT INCLUDED
This housing is designed as a medium sized environmental enclosure and can be ordered with or without heater and blower units. It can accommodate all CCD cameras with a length no greater that 9". Constructed of extruded aluminum and equipped with a hinged, latching cover this security camera housing is well served for general surveillance applications. Equipped with a removable sled the cameras can be set up, adjusted and then re-mounted in the housing. Heater/Blower assemblies are 24VAC, 10 VAC for compatibility with most 24VAC power supplies. The front cover hinge makes adjustment and service to the camera very accessible. Compatible with Samsung Security Cameras and other brands. Available without Heater/Blower. See GVHOUS1
INCLUDES MOUNTING BRACKET
Extruded Aluminum Construction
Hinged Cover with lock receptacle
Easy Access with Front Cover Hinge
Gasket protected cover
Accommodates cameras with a maximum size of 9.45(L) x 4.13(W) x 3.15(H) inches.
IP 66 Rated ensures maximum protection against water, dust, heat and all the elements
Viewing Material: Plate Glass 5mm, 0.2"
Construction: Extruded Aluminum
Cable Entry: Gland fitting on bottom of housing
Latch: Located at rear of housing. Accepts padlock for security
Camera Mounting: Removable camera sled
Weight: 3.52 Kg, 7.76lbs
Dimensions: (D) 390mm, 15.35" X (W)140mm, 5.51" X (H) 115mm, 4.53"
Maximum Camera Size (D) 240mm, 9.45" X (W) 105mm, 4.13" X (H) 80mm, 3.15"
Heater/blower module: 24 Vac, less than 10 VA
Heater: ON = Less than 57F /OFF = More than 77F
Maximum current draw: 350 mA
Average current draw: 250 mA
Fan: ON = More than 104F /OFF = Less than 86F
Average current draw: 150 mA
The GV-HOUS66-HB is an upgrade from the GV-HOUSHB